RG-AP630(IODA)

Outdoor Wireless Access Point Series

Ruijie RG-AP630(IODA) is a 802.11ac outdoor wireless access points for high-speed wireless network applications in extreme outdoor environment. 


The RG-AP630 (IODA) offer access rates up to 1.75 Gbps. The AP takes full care of security, RF control, mobile access, QoS, seamless roaming and other Wi-Fi aspects. Teaming up with Ruijie RG-WS Wireless Controller Series/Cloud AC, the APs offer Wi-Fi user data forwarding, advanced security and access control with ease.


The industrial-class AP enclosure (IP67 rated) can withstand extreme outdoor conditions and hence simplify device installation and maintenance. The RG-AP630(IODA) offers internal omnidirectional antenna and extensive collection of external antennas is also available to overcome various deployment challenges. The AP models support automatic switching between the external and internal antennas.

  • 802.11ac Superior Wireless Performance | Wi-Fi 5
  • Built-in Omnidirectional Antenna (optional External Antenna) & Lightning Arrester
  • Outstanding Environmental Adaptability (IP67, -40-55°C)

Features

Flexible Switching Between The FAT And FIT Modes

The APs support flexible switching over the FAT and FIT modes according to the networking requirements of different industries. When there are few APs, users can adopt the FAT mode for easy independent network establishment. For large-scale networks, the APs can operate in FIT mode which allows centralized management of all the APs and other aspects such as security, traffic management, QoS and IP management when deployed with the RG-WS Wireless Controllers. Smooth transition from one to another, the APs fully protect user investment.

Wireless IPv6 Access

Comprehensive IPv6 features are available to enable IPv6 forwarding on a wireless network. Both IPv4 and IPv6 users can connect to the ACs over tunnels, enabling IPv6 applications to be borne on the wireless network.

RF Security

In collaboration with Ruijie’s RG-SNC Smart Network Commander and RG-WS Wireless Controllers, the APs enable the RF probe scanning mechanism to detect unauthorized access points or other RF interference sources. Once detected, the APs will alert network administrator to monitor potential threats and usage status in the wireless environment.

All-in-one Package for Painless Deployment

The RG-AP630(IODA) Outdoor AP offers you a one-stop installation package. Everything you need is included, from external antennas to lightning arresters and coaxial cables, for effortless outdoor deployment.

Easy-to-use Mount-Kit

An adjustable mount-kit is available by default for painless deployment optimization. The APs can be easily adjusted -60° to 60° horizontally and -60° to 90° vertically to adapt to various scenarios.

802.11ac Superior Wireless Performance

The RG-AP630(IODA) supports 802.11n@2.4GHz and 802.11ac@5GHz with offering access rates of up to 1.75Gbps. The outstanding wireless performance greatly optimizes wireless user experience, increases the number of concurrent users and enhances signal coverage.

Built-in Smart Antenna of AP630 (IODA)

Equipped with built-in antenna, the RG-AP630(IODA) can achieve a real-time antenna beam switching based on the location of access devices, ensuring optimal wireless experience. The APs also support switching of internal and external antennas to flexibly adapt to any deployment scenarios.

 

Model

RG-AP630(IODA)

Target Deployments

For big campus, wireless city, harbour, storage room, mine

Basic Specifications

Radio

Concurrent dual-radio dual-band

Protocol

802.11a/b/g/n/ac

Operating Bands

802.11b/g/n: 2.4GHz to 2.483GHz

802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz

(vary depending on countries)

Antenna

Built-in Omnidirectional Smart Antenna (support external/internal antenna switching)

Antenna Gain

4dBi

Max Throughput

450Mbps@2.4GHz

1.3Gbps@5GHz

1.75Gbps per AP

Spatial Streams

3

Modulation

OFDM: BPSK@6/9Mbps

QPSK@12/18Mbps

16-QAM@24Mbps

64-QAM@48/54Mbps

DSSS: DBPSK@1Mbps

DQPSK@2Mbps

CCK@5.5/11Mbps

MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM

Receiver Sensitivity

11b: -99dBm(1Mbps), -93dBm(5.5Mbps), -90dBm(11Mbps)

11a/g:-93dBm(6Mbps), -85dBm(24Mbps), -82dBm(36Mbps), - 77dBm(54Mbps)

11n:-92dBm@MCS0, -73dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15

11ac HT20: -90dBm (MCS0) , -63dBm (MCS9)

11ac HT40: -85dBm(MCS0) , -60dBm (MCS9)

11ac HT80: -82dBm(MCS0) , -58dBm (MCS9)

Maximum Transmit Power

27dBm

Note: The transmit power is configurable to up to 15dBm in 1dBm steps. The actual transmit power depends on local laws and regulations.

Adjustable Power

1dBm

IP Rating

IP67

Ports

Service Port

1 10/100/1000Mbps ETH1/PoE IN port (RJ-45 connector);

1 SFP port (combo with ETH1)

 

 

Management Port

1 Console Port(RJ45 or Bluetooth)

Power

Power Supply

PoE+ (802.3at)

Power Consumption

<25W

WLAN

Maximum clients per AP

Up to 256

SSID capacity

Up to 16 per radio

Up to 32 per AP

SSID hiding

Support

Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID

Support

Remote Intelligent Perception Technology (RIPT)

Support

X-speed

Support

Intelligent  load balancing based on the number of users or traffic

Support

STA control

SSID/radio-based

Bandwidth control

STA/SSID/AP-based speed control

Preference for 5GHz (band select)

Support

Wireless position tracking

Support

Dynamic Frequency Selection(DFS)

Future Release Support

Security

PSK, Web, and 802.1x authentication

Support

Data encryption

WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)

QR code authentication

Support

SMS authentication

Support

PEAP authentication

Support

Data frame filtering

Whitelist, static/dynamic blacklist

User isolation

Support

Rogue AP detection and countermeasure

Support

Dynamic ACL assignment

Support

WAPI

Support

RADIUS

Support

CPU Protection Policy (CPP)

Support

Network Foundation Protection Policy (NFPP)

Support

Wireless Intrusion Detection System(WIDS)

Support

Wireless Intrusion Prevention System (WIPS)

Support

Routing

IPv4 address

Static IP address or DHCP reservation

IPv6 CAPWAP tunnel

Support

ICMPv6

Support

IPv6 address

Manual or automatic configuration

Multicast

Multicast to unicast conversion

Management and Maintenance

Network management

SNMP v1/v2C/v3, Telnet, SSH, TFTP, and FTP and web management

Visualized wireless heat map analysis

Support

(need to integrate with SNC)

Real-time spectrum analysis

Support

(need to integrate with SNC)

Fault detection and alarm

Support

Cloud AC management

Support

Statistics and logs

Support

FAT/FIT switching

The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.

The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.

External Characteristics

Lock

Support

LED Indicators

Power status and WDS signal strength

Relevant Standard

Wi-Fi Alliance Certification

Support

Safety Standard

GB4943, UL/CSA 60950-1, EN/IEC 60950-1, EN/IEC 60950-22

EMC Standard

GB9254-2008, EN301 489, EN55022, FCC Part15

Health Standard

FCC Bulletin OET-65C ,EN 50385, IC Safety Code 6

Radio Standard

FCC Part15,EN300328, EN301893

Vibration Standard

GB/T 2423

　

Dimensions (W x D x H) (mm)

276 × 246 × 90

Specifications

Weight

<2.5kg

Work Environment

Temperature

Operating Temperature: -40°C to 55°C

Storage Temperature: -40°C to 70°C

Humidity

Operating Humidity: 5% to 95% (non-condensing)

Storage Humidity: 5% to 95% (non-condensing)

Installation Mode

Wall/pole-mount installation